Sản phẩm Vinameed
Daikin VRV IV S
Phụ Kiện Điều Hòa Trung Tâm
Điều Khiển Điều Hòa VRV Daikin
Bộ Chia Gas Điều Hòa VRV Daikin
Thiết Bị Thông Gió Thu Hồi Nhiệt
Điều Hòa Trung Tâm VRF Hisense
Daikin VRV A
Daikin VRV H
Dàn Lạnh VRV Daikin
Điều Hòa Multi Daikin
Điều Hòa Công Nghiệp Daikin
Điều Hòa Trung Tâm VRV TOSHIBA
Điều Hòa Trung Tâm VRV Fujitsu

Tra cứu nhanhTất cả

Tên sản phẩm
Khoảng giá (VNĐ)
Từ: Đến:
Theo hãng sản xuất (Xem/Ẩn)
Thống kê truy cập
Số lượt truy cập 249.693
Tổng số Thành viên 0
Số người đang xem 43
Bộ chia gas hệ (refnet) dùng trong máy lạnh Daikin VRV IV – Model: KHRP26A22T8

Bộ chia gas hệ (refnet) dùng trong máy lạnh Daikin VRV IV – Model: KHRP26A22T8

Cập nhật cuối lúc 08:12 ngày 15/04/2020, Đã xem 429 lần
Có 0 người đã bình chọn
  Đơn giá bán: 1 399 000 đ
  VAT: Đã bao gồm VAT
  Model: KHRP26A22T8
  Tình trạng: Còn hàng   Bảo hành: 12 Tháng

Đặt mua sản phẩm

Số 5 Đường Tây Mỗ, Phường Tây Mỗ, Quận Nam Từ Liêm, Thành phố Hà Nội, Từ Liêm , Hà Nội
Chưa cập nhật hỗ trợ trực tuyến
| Chia sẻ |

Bộ chia gas hệ (refnet) dùng trong máy lạnh Daikin VRV – Model: KHRP26A22T8

Kich thuoc bo chia gas VRV


PCNGO1214A ALL IN ONE System solution for management of building air conditioning One touch selection to total air comfort otice. Using intelligent touch Manager 1. A Daikin-trained engineer must perform installation of the intelligent touch Manager. 2. The clock of the intelligent touch Manager should be adjusted once a month. 3. Daikin’s unique PPD system calculates the energy consumption of each indoor unit based on its operation data output. Note that PPD is not a “meter” adapted to the methods of measuring electrical power consumption in each country. Tenant billing systems differ by country according to each country’s s. Đại lyù phaân phoái: Miễn phí cöôùc cuoäc goïi TRUNG TÂM DICH VU KHÁCH HÀNG Lighting Pump Fan Sensor Keycard switch Web Access via Internet Web Access via LAN 100Mbps Ethernet Fire alarm Di/Pi port kWh meter WAGO I/O up to 30 nodes intelligent touch Manager System Overview Up to 512 groups (1024 indoor units) Max. 64 indoor unit groups One D -NET system Max. 64 indoor unit groups (128 indoor units) Max. 64 indoor unit groups Max. 64 indoor unit groups USB 2.0 Flash drive 1 For Energy Saving & Comfort intelligent touch Manager maximises the advantages of VRV features iTM Plus Adaptor Up to 7 Adaptors Up to 650 management points Di/Pi Line BACnet / IP 3rd party BACnet controller Air Handling Unit Air Conditioning Network Service System Automatic control System settings Operation management 2 Designed for simplicity, this menu provides a quick view of overall status and essential information in a list format. Using the sorting function, VRV system operating under the assessment. List view Layout view ON Filter sign OFF Error visual representation of VRV system. Users can visually locate VRV Easy Engineering preset tool off-site then imported to the intelligent touch Manager via the USB port at the site. This feature makes engineering easier and more manageable. intelligent touch Manager is an advanced multi-zone controller that provides the most cost-effective way to control and monitor the Daikin VRV system. and list view and menus fo It is also easy to use with standardized remote Web Access from your PC. It can manage a total of 650 management points consisting of up to 512 Daikin indoor unit groups ( up to 1024 indoor units ) along with building equipment control / monitoring with Digital Inputs / Output ( Di/Dio ) , Analog Inputs / Output ( Ai/Ao ) and Pulse input ( Pi ) optional devices. KRP928BB2S Residential A/C Icon view USB memory The easy - to -understand icon and intuitive menu will enable users to be an expert in managing the VRV system Intuitive Monitoring & Control Anybody can easily manage VRV system BACnet connection with a wide range of building equipment. WAGO Ao and Pi are newly supported and connectable WAGO modules are added. The new V1.20 software meets all of your control requirements such as ( Engineering option ) Area / Unit Detailed Settings A wide variety of equipment can be connected Integrated control of various air conditioning-related equipment Tenant 1 Working day: Mon - Fri Working hours: 9:00 - 17:30 Setpoint: 24°C Tenant 2 Working day: Mon - Fri Working hours: 8:00 - 17:00 Setpoint: 22°C Tenant 3 Working day: Mon - Sat Working hours: 8:00 - 19:00 Setpoint: 25°C Tenant 4 Saving energy by preventing wasteful operation in unoccupied periods Only When and Where Necessary Not Only VRV System, but Also Other Building Equipment intelligent touch Manager covers not only the VRV system but also other air conditioning systems (e.g. air handling units) and building equipment (e.g. sensors). 3 4 Requirements for air conditioning system depend on the application of buildings. building is occupied by different tenants, and they have their own preferences due to their working days and hours. intelligent touch Manager operation days, time, and setpoint for each tenant or even each indoor unit. Therefore the air conditioning system can operate only when and where necessary irrespective of the motivation for energy saving of the tenants. Working day: Mon - Sun Working hours: 7:00 - 23:00 Setpoint: 20°C One D -NET system Max. 64 indoor unit groups (128 indoor units) VRV system Outdoor‐air processing Fire alarm, Electricity monitoring Building equipment Fire alarm kWh meter Lighting Pump Fan Keycard switch Sensor WAGO I/O up to 30 nodes Lighting, pump, fan, keycard switch, window contact switch, sensors ( temperature, humidity, CO2, lux, occupancy... ) Tenant 1 Tenant 2 Tenant 3 Tenant 4 Air handling unit Chiller BACnet / IP RS485 an emergency stop of air conditioning and ventilation units and execute for either all air areas. Having centralised control to perform an or areas offers building managers of multi-tenant buildings a choice for maximising safety of affected areas without disrupting activities of those areas that are unaffected. Fire alarm signal Stops all air conditioning units in protection areas Stops all air conditioning units Di / Pi Energy consumption trends of all the equipment (including air conditioning units) can be easily understood by using the Energy Navigator feature. Here users can identify air conditioning units that are suspected of overcooling or kept running in unoccupied rooms. The Energy Navigator feature will also provide support in to help ensure advanced energy management. Current year’s energy use Current year’s cumulate line Previous year’s cumulate line Previous year’s energy use LAN Hourly energy consumption is measured and the intelligent touch Manager records data sent from the electrical meter. Energy consumption data is presented on a daily and monthly basis. Also, energy targets and projected energy consumption data as well as comparison data with the previous year’s actual results are presented in a user-friendly format to help ensure energy-saving control. Accumulated data appears in an easy-to-understand graph. Information concerning energy management of the system can be viewed on the user’s own PC via LAN. Daily energy consumption Warning indication Actual daily energy consumption Cumulate line Current month’s target Prediction line Daily average to achieve month’s target Warning indication Actual monthly energy consumption Monthly target energy consumption Cumulate line Current year’s target Prediction line Monthly target to achieve year’s target Monthly energy consumption Comparison from the previous year User’s PC kWh meter Power Supply iTM plus adaptor (Up to 7) kWh meter kWh meter kWh meter Lighting Based on the accumulated data, the intelligent touch Manager automatically that substantially deviate from operation rules established by the user for operation time and predetermined temperature settings. A benchmark showing ways to further reduce energy consumption can be displayed to alert users to even greater energy and cost savings. Energy consumption is automatically evaluated for each room. The degree of rule deviation increases toward the upper right area of the graph. Plot area Number of hours of rule deviation Number of days of rule deviation Room name Number of hours and days of rule deviation Extra energy consumption 5 6 The Web function enables management for the Daikin VRV system with other building equipment integrated into intelligent touch Manager that can be accessed from your PC*. intelligent touch Manager touch screen can be done through Web access. E-mail alert enables prompt response by service engineers based timely and precise knowledge of what happened in the system at the remote site. Up to 4 administrators and 60 general users can be registered. Screens and operations accessible to general users can be restricted. Up to 10 e-mail addresses can be set. SMTP server authentication method is selectable from no authentication, POP before SMTP, or SMTP-AUTH. Network / Internet *Flash player is required. Control Property Manager / Engineering Remote monitoring control Web-Access Multiple buildings can be managed from one site Energy saving assisted by Energy Navigator (Option) Energy Management ( Energy Navigator Option ) Motivating for further energy saving E-mail alerts for reporting malfunctions E-mail alerts are sent immediately to inform concerned parties of malfunctions involving equipment connected to the intelligent touch Manager. Conveying equipment models and error codes, these e-mail alerts enable recipients to take prompt action and can be set E-mail alerts are sent to smartphones and PCs. Up to 10 e-mail addresses can be registered. All views and menus can be accessed via Web Operational information of individual indoor units are monitored, based on distribution of power consumption of outdoor units. Daikin’ PPD keeps track of power distribution s for each indoor unit. It performs air conditioning billing calculations quickly and automatically. Invoice Operation duration Room temperature Expansion valve opening ratio Operational information of individual indoor units Automatic calculation of total power consumption of individual indoor units Total power consumption Pulse signal from the kWh meter Tenant A Tenant A Tenant B Tenant B Tenant C Tenant C kWh meter HIGH LOW MEDIUM Invoice Invoice USB memory It is easy to output PPD data. PPD data is output in CSV format to a PC or USB memory device and can be freely processed and managed. PPD (Power Proportional Distribution) is Daikin’s proprietary calculation method. * Preventive Maintenance Comfort with minimum energy The energy consumption is proportionally calculated for each indoor unit. The data can be used for energy management and calculation of air conditioning usage fees for respective tenants. Enhanced convenience with link to the Air Conditioning Network Service System Air Conditioning Network Service System* ACC centre Repair Personnel at the centre monitor the occurrence of malfunctions and track their cause via the Internet. Enable prompt repairs as service engineers know the cause of the problem beforehand. Advance malfunction warnings help prevent the sudden occurrence of problems later. The intelligent touch Manager connects seamlessly to Daikin’s 24-hour Air Conditioning Network Service System. Allows dispatching of service engineers without a call from customers. Trouble The intelligent touch Manager can be connected to Daikin’s own Air Conditioning Network Service System for remote VRV system. By its ability to predict malfunctions, this service provides customers with additional peace of mind. *Because of restrictions in applicable areas and release times, please consult a Daikin representative separately for details. monitored remotely. Control programme Function Schedule programme Before No No No Yes Yes ( 22 - 25degC ) Yes ( 24 - 26degC ) After Common area Setpoint restriction with Schedule function Air conditioning Lighting Other equipment With the PPD function, power consumption can be calculated for each indoor unit (Option) Reporting the power consumption of VRV system for each tenant Tenant Management ( PPD* Option ) Air Conditioning Network Service System Application 1 Space heating Space cooling Ventilation 7 8 consumption is occupied by air conditioning. intelligent touch Manager provides a huge potential of as schedule programme and setpoint restriction. Case study: Energy Saving by control system The following is an actual case of energy saving done by our control system. By investigating VRV the potential of energy saving, the new control programme succeeded in reducing 16.5% of the power consumption. Preventing VRV operation in unoccupied period and excessive setpoint in unnecessary area mainly contributed to the reduction. As the new programme restricted only unneccesary part of VRV usage, the power consumption decreased without losing comfort of users. Average of daily Power Consumption based on actual measured data Conditions Location : Southeast Asia 2 VRV : 1,300HP 7,290 kWh/day 6,090 kWh/day 16.5% reduction!! Before After Stable operation in server room to protect valuable data Automatic control based on occupancy and check-in/-out status of each room A hotel’s reputation depends on how welcomed and comfortable guests feel during their stay. Yet at the same time, hotel owners might want to focus on cost saving. intelligent touch Manager provides optimum control for hotel application to manage comfortable & energy saving air conditioning system. Two or more air conditioning units operate alternately to equalize and extend the product life cycle of VRV system. intelligent touch Manager changes the combination of operating units and a backup unit by turns. The combination moves from the pattern 1 to 2, 2 to 3, 3 to 1 by schedule programme. ROOM 1 ROOM 2 ROOM 3 ROOM 4 Operating Condition: -Keycard inserted -Window closed VRV system operates. Guests can change the setting by remote controller. Stop Condition: -Keycard inserted -Window opened VRV system stops for energy saving. Remote controller disabled. Stop Condition: -Keycard removed -Window closed VRV system stops for energy saving. Remote controller disabled. Setback Condition: -Keycard removed -Window closed -Room temp. increased VRV system starts setback operation to maintain the room temp within the setback range. VRV outdoor unit Remote Controller Keycard switch Window contact switch Rotation system Pattern 1 Operating Monday at 0:00 Wednesday at 8:00 Friday at 16:00 Monday at 0:00 AC-1 AC-2 AC-3 Operating Backup Pattern 2 Operating Backup Operating Pattern 3 Backup Operating Operating Backup unit automatically starts instead of a malfunctioned unit. When a malfunction occurs, intelligent touch Manager detects it and send an e-mail to a facility manager. Also intelligent touch Manager starts a backup unit by interlock programme to keep two indoor units operating. Note: A malfunctioned unit shall be restored by a facility manager manually. Note: A malfunctioned unit shall be restored by a facility manager manually. Backup operation in case of a malfunction Operating AC-1 AC-2 AC-3 Operating Backup malfunctioned Operating 4 Start 3 1 2 Error Detection a facility manager If an abnormal increase in room temperature is detected, a backup unit automatically starts. When temperature in a server room becomes higher than pre-determined temperature, intelligent touch Manager starts a backup unit by interlock program to maintain room temperature. At the same time, intelligent touch Manager sends an e-mail to a facility manager to notify the temperature increase. To detect the temperature, sensors of indoor units or remote controllers are available. (No additional equipment is necessary.) Additional start up at high temperature Operating AC-1 AC-2 AC-3 Operating Backup Operating 3 Start 2 1 Temperature monitoring & facility manager 28°CDB Hospitality with economy Interlocking with Keycard swithes and Window contact switches, iTM automatically changes VRV operation status according to each room condition. Interlock control Application 2 Application 3 9 10 Occupied Unoccupied WAGO I/O System intelligent touch Manager function System iTM plus adaptor (DCM601A52) Management points Areas Supported languages History Schedule Interlock Emergency stop Automatic changeover Temperature limit Sliding temperature Heating Mode Optimisation (HMO) Timer extension Setback Energy Navigator E-mail alerts Security Screen savers Setting of contact information Air Conditioning Network Service System Maximum number of adaptors: 7 English, French, German, Italian, Spanish, Portuguese, Dutch, Chinese, and Japanese Icons show the operation status of equipment. Detailed information of each management point is displayed. Up to 60 screens can be created. (Engineering option) 7 days of the week + 5 special days can be set. Programmes for respective seasons can be switched by date. Number of programmes:31 Number of changeover groups:512 Unneeded heating is prevented. Operation stop is selectable from 30, 60, 90, 120, 150, and 180 minutes. Screen savers are selectable from 3 patterns. Contact information for servicing can be registered. A service agreement needs to be concluded. Up to 500,000 events are recorded in history including malfunctions, operations, automatic control, and system information. Operation origin is also recorded. Maximum number of management points: 650 (Number of D connection management points: 512) Number of programmes:100 Up to 20 actions/day can be set. Automatic control Data control Remote access Special day settings can be reused every year. Number of programmes:500 Interlock is possible for on/off, malfunction, analogue value, and operation mode switching. Number of temperature limit groups: 8 Upper limit range: 32-50°C Lower limit range: 2-16°C Number of sliding temperature groups: 8 Outdoor temperature range: 18-34°C Setpoint range: 16-32°C Setback setpoint can be set for 2 patterns. Temperature range: 1-7°C , −1-−7°C (setpoint shift amount) Hourly Power Proportional Distribution results up to 13 months are recorded. The system supports data output in CSV format. Web browsers can display the same type of screen as the intelligent touch Manager. Up to 4 administrators and 60 general users can be registered. Screens and operation accessible to general users can be restricted. Automatic registration Maximum number of areas: 650 Maximum area hierarchies: 10 Monitoring screens Category Function Remarks Icon view List view Layout view Weekly schedule Yearly calendar Seasonal schedule Basic functions Air Conditioning Network Service Energy Saving Air Conditioning Network Service System Actual results of daily/monthly energy consumption are shown in graphs. Comparisons can be made with predetermined values/actual results of the previous year. VRV waste is calculated. Up to 10 e-mail addresses can be set. Addresses for sending malfunction alerts can be set by range of management points. The SMTP server authentication method is selectable from no authentication, POP before SMTP, and SMTP-AUTH. Indoor units connected to D -NET are automatically detected, and icons for respective models are automatically registered. Screen lock functions are available. Access restrictions can be set for each general user. A service agreement needs to be concluded. Power Proportional Distribution Web access 11 12 DAIKIN supplied equipment & Software option DCM601A51 DCM601A52 DCM002A51 DCM008A51 DCM009A51 WAGO I/O system intelligent touch Manager iTM plus adaptor (Option) iTM power proportional distribution software (Option) iTM energy navigator software (Option) BACnet client software (Option) Locally supplied equipment Model Item Web browser : Internet Explorer 11 Firefox 26.0 Chrome 32.0 Flash Player Ver11.9.900.170 USB 2.0 Up to 32GB memory can use D -compatible indoor units AHU kit (EKEQFCB,EKEQDCB,EKEQMCB) Interface adaptor for SkyAir (DTA102A52 , DTA112BA51) Interface adaptor for residential indoor unit (KRP928BB2S) Central control adaptor kit for package A/C (DTA107A55) VRV outdoor units Heat Reclaim Ventilator D -compatible air-cooled chillers (UWA/Y) / water-cooled chillers (ZUW) Di port of intelligent touch Manager Di port of iTM plus adaptor D Di Unit (DEC101A51) WAGO Di D Dio Unit (DEC102A51) General-purpose adaptor (DTA103A51) WAGO Di, Do Pi port of intelligent touch Manager Pi port of iTM plus adaptor Energy consumption of VRV outdoor units WAGO Pi (Not available for PPD function) WAGO Ao WAGO Ai Room temperature, setpoint of indoor units D3 Chiller outlet/inlet water temperatures BACnet object BI/BO/BV can be linked BACnet object BI/BO/BV can be linked BACnet object AI/AO/AV can be linked BACnet obejct AO/AV can be linked BACnet connectable AHU using MicroTech Indoor Outdoor Ventilator D3 Chiller *1: Total of D connection equipment (Indoor, Ventilator, D3 Chiller, D3 Di, D3 Dio) *2: Maximum number of management points for D3 Chiller only *3: Total of Di/Pi management points *4: Total of External Di, External Dio, External Ai, External Ao, External Pi and Internal Ai *5: Total of BACnet points (include AHU*6) *6: AHU count as 20 BACnet points USB memory PC for Web access D3 Di External Di External Dio Internal Pi External Pi External Ao External Ai BACnet Di BACnet Dio BACnet Ai BACnet Ao AHU *6 Maximum: 80 Maximum: 512 *1 Maximum: 320 *2 Maximum: 512 *1 Maximum: 512 *4 Maximum: 512 *1 Maximum: 32 *3 Maximum: 512 *4 Types of management points and target equipment/interface Management point Supported equipment Number of management points Maximum: 512 *1 Maximum: 32 *3 Maximum: 512 *4 Maximum: 80 Maximum: 512 *4 Maximum: 512 *5 Maximum: 20 Di D3 Dio Pi Internal Ai Item Di module (DC24V/4.5mA) : 750-400,750-432 Di module (DC24V/2.8mA) : 750-430 Do module (AC230V/DC30V 2A) : 750-513/000-001 Do module (DC24V 0.5A) : 750-504 Ai module (4 20mA 12bit) : 750-454,750-455 Ai module (-10 10V 13bit) : 750-479 Ai module (0 10V 12bit) : 750-459 Ao module (4 20mA 12bit) : 750-554,750-555 Ao module (0 10V 10bit) : 750-560 Ao module (0 10V 12bit) : 750-559 Thermistor module (NTC20K) : 750-461/020-000 Thermistor module (Pt 100/RTD) : 750-461/750-460 Thermistor module (Pt 1000/RTD) : 750-461/000-003,750-460/000-003 Thermistor module (Ni 100/RTD) : 750-461/000-004 Thermistor module (Ni 1000 TK6180/RTD) : 750-461/000-005,750-460/000-005 Pi module : 750-638 iTM plus adaptor (DCM601A52) Input/Output port intelligent touch Manager Port Number Use 1ch 1ch 1ch 4ch 1ch 1ch POWER SUPPLY : DCM601A51 AC100-240V(±10%)(50/60Hz) INPUT : 23W MASS : 2.4kg FUSE AMP : 3.15A Operating temperature limit : -0 - +40 Operating humidity limit : MAX.15 - 85 Storage temperature range : -15 - +60 Installation direction : Vertical direction only POWER SUPPLY : DCM601A52 AC100V-240V(±10%)(50/60Hz) INPUT : 6W MASS : 0.5kg FUSE AMP : 3.15A Operating temperature limit : -10 - +50 Operating humidity limit : MAX.15 - 85 Storage temperature range : -15 - +60 Installation direction : Vertical direction only D LAN RS485 Di(Pi) plus ADP IF internal modem (option) D -NET (Up to 64 groups) Web Access (100BASE-TX ) External I/O module (Di,Dio,Ai,Ao,Pi) iTM plus adaptor (Up to 7 adaptors) Emergency stop input (Di1) Pulse input,contact signal input Air Conditioning Network Service System Port Number Use 1ch 1ch 4ch plus ADP IF D Di(Pi) iTM plus adaptor (Up to 7 adaptors) D -NET (Up to 64 groups) Pulse input,contact signal input 13 14 The user-friendly controller features colours, multilingual function, and icons in the display for ease of understanding. A wide variety of control methods can be accommodated, permitting administrators to monitor and operate the system even when they are away from the controller. Connect VRV to your BMS via BACnet® or LONWORKS® Compatible with BACnet® and LONWORKS®, the two leading open network comunication protocols, Daikin offers interfaces that provide a seamless connection between VRV and your BMS. Dedicated interfaces make Daikin air conditioners freely compatible with open networks Seamless connection between VRV and BACnet® open network protocol. Facilitating the network integration of VRV and LONWORKS® Convenient controllers that offer more freedom to administrators BACnet® LONWORKS® Ease of use and expanded control functions Notes: 1.BACnet®is a registered trademark of American Society of Heating , Refrigerating and Air-Conditioning Engineers(ASHRAE). 2.LONWORKS® is a trademark of Echelon Corporation registered in the United States and other countries. DCS601C51 DMS502B51 (Interface for use in BACnet® ) DMS504B51 (Interface for use in Daikin offers a variety of control systems LONWORKS®)

Chưa có nhận xét gì về sản phẩm
Sản phẩm cùng loại khác
Bộ chia gas hệ (refnet) dùng trong máy lạnh Daikin...
Giá: 2 200 000 đ
Bộ chia gas hệ (refnet) dùng trong máy lạnh Daikin...
Giá: 3 300 000 đ
Vinameed chuyên cung cấp Bộ chia gas máy lạnh trun...
Giá: 2 500 000 đ
Bộ chia gas hệ (refnet) dùng trong máy lạnh Daikin...
Giá: 1 800 000 đ

    Mã số thuế: 0109113636
  • Ngày cấp giấy phép: 31/03/2020
  • Nơi cấp: Sở Kế Hoạch và Đầu Tư TP.Hà Nội
  • Địa chỉ: Số 5 Đường Tây Mỗ, Phường Tây Mỗ, Quận Nam Từ Liêm, Hà Nội.
  • Hotline: 0923.090.888
    Tên viết tắt: VINAMEED VIET NAM
  • Ngành nghề chính: Lắp đặt hệ thống cấp, thoát nước, lò sưởi và điều hoà không khí